Dynamic Arp Inspection List - Dell PowerConnect 5524P User Manual

Dynamic ARP Inspection List

An ARP inspection list consists of entries where each entry is a pair of
MAC/IP addresses.
To create a new ARP inspection list and add the first entry to it:
1 Click Switching > Dynamic ARP Inspection > Dynamic ARP
Inspection List in the tree view to display the Dynamic ARP Inspection
List: Summary page.
Figure 18-2. Dynamic ARP Inspection List: Summary
The dynamic ARP lists are displayed.
2 To create a new list and enter the first address pair in it, click Add, and
enter the fields:
• List Name — Create and enter a list name.
• IP Address — Enter the IP address that will be mapped to the MAC
address entered below.
MAC Address — Enter the MAC address that will be mapped to the
•
IP address entered above.
Dell PowerConnect 55xx Systems User Guide
555