Dell PowerConnect 5524P User Manual page 200

Global — A globally unique IPv6 address; visible and reachable
•
from different subnets.
– Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
• VLAN — The VLAN on which the IPv6 interface is configured.
ISATAP — The IPv6 interface is configured on an ISATAP
•
tunnel.
– New Log Server IP Address — Enter the IP address of the remote
SYSLOG server.
– UDP Port (1-65535) — Enter the UDP port to which the logs are sent
for the selected server.
– Facility — Select a user-defined application from which system logs
are sent to the remote server. Only a single facility can be assigned to a
single server. If a second facility level is assigned, the first facility level
is overridden. All applications defined for a device utilize the same
facility on a server.
– Description (0-64 Characters) — Enter a server description.
– Severity to Include — Check the severity levels to be logged to the
remote server. The event severity levels are listed on this page in
descending order from the highest severity to the lowest. When a
severity level is selected to appear in a log, all higher severity events are
automatically selected to appear in the log. When a security level is
not selected, no lower severity events appear in the log.
200
Dell PowerConnect 55xx Systems User Guide