Dell PowerConnect 5524P User Manual page 567

To configure DHCP snooping on the device:
1 Click Switching > DHCP Snooping > Global Parameters in the tree view
to display the Global Parameters page.
Figure 19-1. Global Parameters
2 Enable/disable DHCP snooping on the device in the DHCP Snooping
Status field.
3 If DHCP snooping is enabled, enter the fields:
Option 82 Passthrough — Enable/disable whether to forward (enable)
–
or filter (disable) DHCP packets, received from untrusted interfaces,
with option-82 information.
– Verify MAC Address — Enable/disable MAC addresses verification.
This determines whether to forward (enable) or filter (disable) DHCP
packets received from untrusted interfaces, whose source MAC
address and the DHCP client MAC address do not match.
– Save Binding Database to File — Enable/disable saving the DHCP
snooping database to flash memory.
– Save Binding Database Internal (600-86400) — Enter how often, in
seconds, the Binding database is updated.
Configuring DHCP Snooping Global Parameters Using CLI Commands
Dell PowerConnect 55xx Systems User Guide
567