Frame Type — Packet type accepted by the LAG. The possible options
–
are:
•
Admit All — Tagged and untagged packets are both accepted by
the LAG.
•
Admit Tag Only — Only tagged packets are accepted by the LAG.
•
Admit Untagged Only — Only untagged packets are accepted on
the LAG.
–
Ingress Filtering — Enable/disable Ingress filtering by the LAG.
Ingress filtering discards packets that are destined to VLANs of which
the specific LAG is not a member.
–
Native VLAN ID (1-4094) — Enter VLAN used for untagged traffic
to trunk ports, or select None.
–
Multicast VLAN ID (1-4094) — Enter VLAN used for Multicast TV
VLAN traffic on access ports, or select None.
–
Customer VLAN ID (1-4094) — Enter VLAN used for customer
ports, or select None.
Assigning LAGs to VLAN Groups Using CLI Commands
Refer to Table 16-2 for a list of the LAG to VLAN CLI commands.
476
Dell PowerConnect 55xx Systems User Guide