Dell PowerConnect 5524P User Manual page 253

Performing Fiber Optic Cable Tests Using CLI Commands
The following table contains the CLI command for performing fiber optic
cable tests.
Table 9-39. Fiber Optic Cable Test CLI Commands
CLI Command
show fiber-ports optical-
[
transceiver interface
[gigabitethernet|tengigabitethe
rnet] port-number]
The following is an example of the CLI command:
console# show fiber-ports optical-transceiver detailed
Port Temp
[C]
------- ----
gi1/0/1 48
gi1/0/2 43
[ ]
detailed
Voltage Current
[aM]
------- ----
5.15 50
5.15 10
Dell PowerConnect 55xx Systems User Guide
Description
Displays the optical transceiver
diagnostics.
Output Input
[mWat] [mWa]
---- ----
1.789 1.789
1.789 1.789
POWER LOS
[mWa]
---- ---
No No
No No
253