Dell PowerConnect 5524P User Manual page 469

– Port VLAN Mode — Enter the port VLAN mode. The possible
options are:
• General — The port belongs to VLANs, and each VLAN is
user-defined as tagged or untagged (full 802.1Q mode).
Access — The port belongs to a single untagged VLAN. When a
•
port is in Access mode, the packet types that are accepted on the
port cannot be designated. Ingress filtering cannot be
enabled/disabled on an access port.
• Trunk — The port belongs to VLANs on which all ports are tagged
(except for one port that can be untagged).
• Customer — When a port is in Customer mode, an added tag
provides a VLAN ID to each customer, ensuring private and
segregated network traffic for that customer.
• Private VLAN Promiscuous — The port is a promiscuous port.
• Private VLAN Host — The port is an isolated port
– Current Reserved VLAN — Displays the VLAN currently designated
by the system as the reserved VLAN.
– Reserve VLAN for Internal Use (1-4094) — Check to enter a reserved
VLAN, and enter its ID. If none is required, check None.
– PVID (1-4095) — Enter a VLAN ID to be added to untagged packets.
The possible values are 1-4095. VLAN 4095 is defined according to
standard and industry practice as the discard VLAN. Packets classified
to the discard VLAN are dropped.
– VLAN List (I - Inactive Configuration) — Enter the VLAN(s) to
which this port belongs, and indicate its type. The possible options are:
• T — Tagged. The port is a member of a VLAN. All packets
forwarded by the LAG are tagged. The packets contain VLAN
information.
• U — Untagged. The port is a member of a VLAN. Packets
forwarded by the LAG are untagged.
• F — Forbidden. The port is denied membership to a VLAN.
Click Add to move the port to the VLAN list together with its type.
Dell PowerConnect 55xx Systems User Guide
469