To enable receiving Anycast updates on an interface:
1 Click System > Time Synchronization > SNTP Interface Settings to
display the SNTP Interface Settings: Summary page.
Figure 9-9. SNTP Interface Settings: Summary
The following fields are displayed for every interface for which an SNTP
interface has been enabled:
–
Interface — The port, LAG or VLAN on which SNTP is enabled.
–
Receive Servers Updates — Displays whether the interface is enabled
to receive updates from the SNTP server.
2 To add an interface that can receive SNTP server updates, click Add.
3 Select an interface and enable/disable State to indicate that the interface
can now receive/not receive SNTP server updates.
184
Dell PowerConnect 55xx Systems User Guide