To map DSCP to queues:
1 Click Quality of Service > General > DSCP to Queue in the tree view to
display the DSCP to Queue page.
Figure 22-5. DSCP to Queue
The DSCP values in the incoming packet and its associated queues are
displayed.
2 Enter the fields:
–
DSCP In — The values of the DSCP field in the incoming packet.
–
Queue — The queue to which packets with the specific DSCP value is
assigned. The values are 1-8, where 1 is the lowest value, and 8 is the
highest.
Dell PowerConnect 55xx Systems User Guide
653