Dell PowerConnect 5524P User Manual page 374

sFlow Interface Settings
To sample datagrams or counters from a port, the port must be associated
with a receiver. sFlow port settings can be configured only after a receiver has
been defined in the sFlow Receiver Settings pages.
To enable sampling and configure the port from which to collect the sFlow
information:
1 Click System > sFlow > sFlow Interface Settings in the tree view to
display the sFlow Interface Settings: Summary page.
Figure 9-67. sFlow Interface Settings: Summary
The sflow interface settings are displayed.
2 To associate an sFlow receiver with a port, click Add, and enter the fields:
– Interface — Select the unit/port from which information is collected.
– Flow Sampling — Enable/disable flow sampling. Flow sampling
cannot be disabled if Counters Sampling is disabled.
374
Dell PowerConnect 55xx Systems User Guide