•
Wireless access points
•
IP gateways
•
Audio and video remote monitoring devices
PDs are connected to the device via the Gigabit ports.
To configure PoE parameters on devices equipped with PoE:
1
System
Click
the Power Over Ethernet: Summary page.
Figure 9-3. Power Over Ethernet: Summary
2 The PoE global parameters are displayed:
–
Power Status — The inline power source status.
•
On — The power supply unit is functioning.
•
Off — The power supply unit is not functioning.
158
Dell PowerConnect 55xx Systems User Guide
General
Power over Ethernet in the tree view to display
>
>