Dell PowerConnect 5524P User Manual page 121

Powerconnect 5000 series

Hide thumbs Also See for PowerConnect 5524P:

Table of Contents

4 Move the required protocols from the Available Protocols list to the

Filtered Protocols list. The following displays the protocols and the

addresses that are blocked:

Table 8-9. Protocol Filtering

Configuring Proprietary Protocol Filtering Using CLI Commands

The following table summarizes the CLI commands for setting fields in the

Proprietary Protocol Filtering pages.

Only one of the following CLI commands can be active on a port at the same

time. To add other protocol filters, the command must be negated and then

run again with all the required protocol names.

Table 8-10. Proprietary Protocol Filtering CLI Commands

service-acl input protocol1

[protocol2 ... protocol6]

no service-acl input

The following is an example of some of the CLI commands:

console (Config-if)# service-acl input blockcdp blockvtp

Destination Address

0100.0ccc.cccc

0100.0ccc.cccd

0100.0ccc.ccc0 - 0100.0ccc.cccf

Dell PowerConnect 55xx Systems User Guide

Protocol Type

Discards packets that are classified to

specific protocols.

Use the no form of those commands

to disable discarding of the packets.

Show Quick Links

Table of Contents