Dell PowerConnect 5524P User Manual page 328

Link Local Interface — When the server supports an IPv6 Link Local
–
address, this specifies the Link Local interface. The possible options
are:
• VLAN — The IPv6 interface is configured on this VLAN.
• ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.
Recipient IP — The IP address to whom the traps are sent.
–
– Notification Type — The notification sent. The possible options are:
• Trap — Traps are sent.
• Inform — Informs are sent.
If SNMP versions 1 and 2 are enabled for the selected recipient, enter the
fields:
– Community String — The community string of the trap manager.
– Notification Version — The message trap SNMP version (v1 or v2).
If SNMPv3 is used to send and receive traps, enter the fields:
– User Name — The user to whom SNMP notifications are sent.
– Security Level — The means by which the packet is authenticated.
The possible options are:
• No Authentication — The packet is neither authenticated nor
encrypted.
Authentication — The packet is authenticated.
•
• Privacy — The packet is both authenticated and encrypted.
3 Enter the fields for all versions of SNMP:
– UDP Port (1-65535) — The UDP port used to send notifications. The
default is 162.
Filter Name — Select an SNMP filter from a list of previously-defined
–
SNMP filters.
– Timeout (1-300) — The amount of time (seconds) the device waits
before resending informs.
– Retries (1-255) — The amount of times the device resends an inform
request.
328
Dell PowerConnect 55xx Systems User Guide