•
Copy a configuration file to the Running Configuration file. It is
important to be aware that copying a file to the Running Configuration
file actually executes these commands, so some of the configuration
commands might fail (for example when trying to create a VLAN that is
already defined on the system).
•
Restore configuration factory defaults.
To copy files:
1 Click System > File Management > Copy Files in the tree view to display
the Copy Files page.
Figure 9-60. Copy Files
2 To copy the firmware from the Master unit to the Backup Master unit or to
all other units, select Copy Master Firmware and select the options:
–
Source — Select either the current Master unit's software image file or
boot code file.
356
Dell PowerConnect 55xx Systems User Guide