Dell PowerConnect 5524P User Manual page 119

2 To bind an ACL to an interface, select an interface and click Edit.
3 Select an ACL(s). You can select one of each type (MAC-based ACL,
IPv4-based ACL or IPv6-based ACL) or one IPv4-based ACL and one
IPv6-based ACL.
Configuring ACL Bindings Using CLI Commands
The following table summarizes the CLI commands for configuring ACL
Bindings.
.
Table 8-8. ACL Bindings CLI Commands
CLI Command
service-acl input acl-name1
[acl-name2]
no service-acl input
show access-lists [acl-name]
The following is an example of some of the CLI commands:
console(config)# mac access-list extended server
console(config-mac-al)# permit 00:00:00:00:00:01
00:00:00:00:00:ff any
console(config-mac-al)# exit
console(config)# interface gi1/0/1
console(config-if)# service-acl input server
Description
Controls access to an interface
Use the no form of the command to
remove access control.
Displays access control lists (ACLs)
configured on the switch.
Dell PowerConnect 55xx Systems User Guide
119