Dell PowerConnect 5524P User Manual page 177

Defining SNTP Global Settings Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the SNTP Global Settings pages.
Table 9-8. SNTP Global Parameters CLI Commands
CLI Command
sntp client poll timer
seconds
no sntp client poll timer
sntp broadcast client
enable
no sntp broadcast client
enable
sntp anycast client enable
no sntp anycast client
enable
sntp unicast client enable
no sntp unicast client
enable
show sntp configuration
The following is an example of the CLI commands:
console(config)# sntp anycast client enable
SNTP Authentication
Use the SNTP Authentication page to enable/disable SNTP authentication
between the device and an SNTP server, and to set the means by which the
SNTP server is authenticated.
Description
Sets the polling time for an SNTP client.
Use the no form of this command to
restore the default configuration.
Enables SNTP Broadcast clients.
Use the no form of this command to
disable SNTP Broadcast clients.
Enables SNTP Anycast clients.
Use the no form of this command to
disable SNTP Anycast clients.
Enables SNTP predefined Unicast clients.
Use the no form of this command to
disable SNTP Unicast clients.
Displays SNTP configuration
Dell PowerConnect 55xx Systems User Guide
177