Dell PowerConnect 5524P User Manual page 523

Table 16-5. IGMP Snooping CLI Commands (Continued)
CLI Command
ip igmp query-max-response-
time seconds
no ip igmp query-max-response-
time
ip igmp last-member-query-
count count
no ip igmp last-member-query-
count
ip igmp snooping vlan vlan-id
immediate-leave
no ip igmp snooping vlan vlan-
id immediate-leave
ip igmp snooping vlan vlan-id
querier
no ip igmp snooping vlan vlan-
id querier
ip igmp snooping querier
address source-ip-address
no ip igmp snooping querier
address
show ip igmp snooping groups
[vlan vlan-id] [address ip-
multicast-address]
show ip igmp snooping
interface vlan-id
show ip igmp snooping mrouter
[
interface vlan-id
]
Dell PowerConnect 55xx Systems User Guide
Description
Configures the Query Maximum
Response time.
Use the no format of the command to
return to default.
Configures the Last Member Query
Counter.
Use the no format of the command to
return to default.
Enables the IGMP Snooping
Immediate-Leave processing on a
VLAN.
Use the no format of the command to
disable IGMP Snooping Immediate-
Leave processing.
Enables the IGMP querier on a specific
VLAN.
Use the no form of this command to
disable the IGMP querier on a VLAN
interface.
Defines the source IP address that the
IGMP Snooping querier would use.
Use the no form of this command to
return to default.
Displays the Multicast groups learned
by IGMP snooping.
Displays IGMP snooping configuration.
Displays information about
dynamically learned Multicast router
interfaces.
523