Dell PowerConnect 5524P User Manual page 367

The following is an example of the CLI command:
console# reload
You haven't saved your changes. Are you sure you want to
continue? (Y/N)[N] Y
This command will reset the whole system and disconnect
your current session. Do you want to continue? (Y/N)[N]
Unit Identification (Location)
The Location LED on a unit helps you to discover a specific unit, or indeed,
all the units in a stack.
To light up the Location LED:
1 Click System > Stack Management > Unit Identification in the tree
view to display the Unit Identification page.
Figure 9-65. Unit Identification
Dell PowerConnect 55xx Systems User Guide
367