Dell PowerConnect 5524P User Manual page 65

Privileged access can be protected, to prevent unauthorized access and to
secure operating parameters. Passwords are displayed on the screen, and are
case-sensitive.
NOTE:
The enable command is only necessary if you login with privilege level less
than 15.
To access and list the Privileged EXEC mode commands:
1 At the prompt type enable and press <Enter>.
2 When a password prompt displays, enter the password and press
<Enter>.
The Privileged EXEC mode prompt displays as the device host name
followed by #. For example:
To list the Privileged EXEC commands, type a question mark at the
command prompt.
To return from Privileged EXEC mode to User EXEC mode, type disable
and press <Enter>.
The following example illustrates accessing privileged EXEC mode and then
returning to the User EXEC mode:
console> enable
Enter Password: ******
console#
console# disable
console>
Use the exit command to return to a previous mode.
To configure the device, enter the next level, Global Configuration mode.
Global Configuration Mode
The Global Configuration mode manages device configuration on a global
level. Global Configuration commands apply to system features, rather than a
specific protocol or interface.
console#
Dell PowerConnect 55xx Systems User Guide
65