–
Console/Telnet/Secure Telnet Line Aging (1-365) — Check to set the
amount of time in days that elapses before a line password is aged out.
Enter the number of days after which the password expires.
Expiry Date — Displays the expiration date of the line password.
–
Lockout Status — Displays whether the user currently has access
–
(status Usable), or whether the user is locked out due to too many
failed authentication attempts since the user last logged in
successfully (status Locked).
–
Reactivate Locked Line — Check to reactivate the line password for a
Console/Telnet/Secure Telnet session. Access rights can be suspended
after a number of unsuccessful attempts to log in.
Assigning Line Passwords Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the Line Password page
.
Table 9-46. Line Password CLI Commands
CLI Command
line {console|telnet|ssh}
password password
[encrypted]
no password
The following is an example of the CLI commands:
console(config)# line console
console(config-line)# password dell
Description
Identifies a specific line for configuration
and enters the Line Configuration
command mode.
Sets a password on a line.
Use the no form of this command to
remove the password.
Dell PowerConnect 55xx Systems User Guide
273