Dell PowerConnect 5524P User Manual page 592

Defining iSCSI Targets Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the iSCSI Targets Table.
Table 20-2. iSCSI Targets Table CLI Commands
CLI Command
iscsi target port tcp-port-1
[tcp-port-2... tcp-port-8]
[address ip-address] [name
target-name]
no iscsi target port tcp-
port-1 [tcp-port-2... tcp-port-
8] [address ip-address]
show iscsi sessions
The following is an example of the CLI commands:
console(config)# iscsi target port 30001 address
176.16.1.1 name iqn.1993-11.com.disk
vendor:diskarrays.sn.45678.tape:sys1.xyz
592
Dell PowerConnect 55xx Systems User Guide
Description
Configures iSCSI port/s, target address
and name.
Use the no form of this command to
delete an iSCSI target.
Show the current iSCSI targets and
sessions.