Dell PowerConnect 5524P User Manual page 225

– Tunnel Router's Domain Name — Enter a specific automatic tunnel
router domain name.
– Domain Name Query Interval (10 - 3600) — Enter the interval
between DNS queries (before the IP address of the ISATAP router is
known) for the automatic tunnel router domain name.
– ISATAP Router Solicitation Interval (10 - 3600) — Enter the interval
between router solicitations messages when there is no active router.
– ISATAP Robustness (1 - 20) — Enter the number of DNS
Query/Router Solicitation refresh messages that the device sends per
second.
Select the Use Default option to use the default setting of a field.
Defining ISATAP Tunnel Parameters Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the ISATAP Tunnel pages.
Table 9-29. ISATAP Tunnel CLI Commands
CLI Command
interface tunnel number
tunnel mode ipv6ip {isatap}
no tunnel mode ipv6ip
tunnel isatap router router_name
no tunnel isatap router
tunnel source {auto|ip-address
ipv4-address}
no tunnel source
Description
Enters tunnel interface configuration
mode.
Configures an IPv6 transition
mechanism global support mode.
Use the no form of this command to
remove an IPv6 transition mechanism.
Configures a global string that
represents a specific automatic tunnel
router domain name.
Use the no form of this command to
remove the string associated with the
router domain name and restore the
default configuration.
Sets the local (source) IPv4 address of
a tunnel interface.
Use the no form of the command to
delete the tunnel local address.
Dell PowerConnect 55xx Systems User Guide
225