Dell PowerConnect 5524P User Manual page 341

Auto Update Configuration through the GUI
To set the auto update and configuration parameters:
NOTE:
. For the automatic options in this page to work the following must be
implemented:
Since Auto-Config depends on retrieving information from a DHCP server, the
•
startup configuration needs to include a DHCP IP interface. The device is
defined as a DHCP client, as described in "DHCP IPv4 Interface" on page 207.
After reboot, this command is not saved in the Startup configuration.
Preparations described above must be completed on the DHCP server and
•
TFTP servers.
1 Click System > File Management > Auto Update of
Configuration/Image File in the tree view to display the Auto Update of
Configuration/Image File page.
Figure 9-54. Auto Update of Configuration/Image File
Dell PowerConnect 55xx Systems User Guide
341