Dell PowerConnect 5524P User Manual page 685

Table 22-17. Policy Class Maps CLI Commands (Continued)
CLI Command
qos aggregate-policer
aggregate-policer-name
committed-rate-kbps excess-
burst-byte [exceed-action
{drop|policed-dscp-transmit}]
no qos aggregate-policer
aggregate-policer-name
show policy-map [policy-map-
name]
The following is an example of the CLI commands:
console(config)# policy-map policy1
console(config-pmap)# class class1 access-group enterprise
console(config-pmap)# trust cos-dscp
console(config-pmap)# set dscp 56
console(config-pmap)# class class1
console(config-pmap-c)# police 124000 9600 exceed-action
drop
console(config)# qos aggregate-policer policer1 124000
9600 exceed-action drop
Description
Defines the policer parameters that
can be applied to multiple traffic
classes.
Use the no form of this command to
remove an existing aggregate policer.
Displays all policy maps or a specific
policy map.
Dell PowerConnect 55xx Systems User Guide
685