Dell PowerConnect 5524P User Manual page 329

Configuring SNMP Notification Recipients Using CLI Commands
The following table summarizes the CLI commands for setting fields in the
Notification Recipients pages.
Table 9-62. SNMP Notification CLI Commands
CLI Command
snmp-server host {ipv4-
address|ipv6-address|hostname}
[traps|informs] [version {1|2c|3
[auth|noauth|priv]}] community-
string [udp-port port] [filter
filtername] [timeout seconds]
[retries retries]
no snmp-server host {ipv4-
address|ipv6-address|hostname}
[traps|informs] [version {1|2c|3}]
show snmp
The following is an example of the CLI commands:
console(config)# snmp-server host 172.16.1.1 private
console(config)# end
console# show snmp
Community-
String
-------------
public
private
private
Community-
Access
------------
read only
read write
su
Dell PowerConnect 55xx Systems User Guide
Description
Creates or updates a notification
recipient receiving notifications in
SNMP version 1, 2 or 3.
Use the no form of this command to
remove the specified host.
Shows the current SNMP
configuration.
View Name
---------
user-view
default
DefaultSup
er
IP Address
----------
All
172.16.1.1
172.17.1.1
329