Dell PowerConnect 5524P User Manual page 562

Configuring Trusted Interfaces Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the Trusted Interface pages .
Table 18-5. Configuring Trusted Interface Parameters CLI Commands
CLI Command
ip arp inspection trust
no ip arp inspection trust
show ip arp inspection
[[gigabitethernet|tengigabit
ethernet] port-number|port-
channel LAG-number]
The following is an example of some of the CLI commands:
console(config)# interface gi1/0/3
console(config-if)# ip arp inspection trust
562
Dell PowerConnect 55xx Systems User Guide
Description
Configures an interface trust state that
determines if incoming ARP packets are
inspected.
Use the no form of this command to
restore the default configuration.
Displays the ARP inspection configuration
for all interfaces or a specific interface.