Dynamic Arp Inspection Entries - Dell PowerConnect 5524P User Manual

Dynamic ARP Inspection Entries

To add additional addresses to the lists defined in the Dynamic ARP
Inspection List page:
1 Click Switching > Dynamic ARP Inspection Entries > Dynamic ARP
Inspection Entries in the tree view to display the Dynamic ARP
Inspection Entries: Summary page.
Figure 18-3. Dynamic ARP Inspection Entries: Summary
The dynamic ARP entries for the selected list are displayed.
2 To add a new address pair to a list, click Add and select the list.
3 Enter the fields:
• IP Address — Enter the IP address that will be mapped to the MAC
address entered below.
MAC Address — Enter the MAC address that will be mapped to the
•
IP address entered above.
Dell PowerConnect 55xx Systems User Guide
557