Displaying Device Versions Using the CLI
The following table summarizes the CLI commands for viewing fields
displayed in the Versions page.
Table 9-70.
Versions CLI Commands
CLI Command
show version [unit-id]
The following is an example of the CLI commands:
console> show version 2
Unit
SW Version
----
------------- ------------- ------------
2
1.0.0.8
Reset
Use the Reset page to reset the device from a remote location.
To reset a unit in the stack:
1 If changes were made to the Running Configuration file, save them to the
Startup Configuration file before resetting the device. This prevents the
current device configuration from being lost. For more information about
saving Configuration files, see "Copy Files" on page 355.
Description
Displays system version information for a
unit or for the whole stack.
Boot Version
1.0.0.02
Dell PowerConnect 55xx Systems User Guide
HW Version
00.00.01
365