Dell PowerConnect 5524P User Manual page 471

Table 14-2. Port-to-VLAN Group Assignments CLI Commands (Continued)
CLI Command
switchport access vlan {vlan-
id|none}
no switchport access vlan
switchport trunk allowed vlan
{all|none|add vlan-list|remove
vlan-list|except vlan-list}
no switchport trunk allowed vlan
switchport trunk native vlan {vlan-
id|none}
no switchport trunk native vlan
switchport general allowed vlan
{add|remove} vlan-list
[tagged|untagged]
no switchport general allowed vlan
switchport general pvid vlan-id
no switchport general pvid
switchport customer vlan vlan-id
no switchport customer vlan
Dell PowerConnect 55xx Systems User Guide
Description
Configures the VLAN ID when
the interface is in access mode.
Use the no form of this command
to restore the default
configuration.
Sets the trunk characteristics
when the interface is in Trunking
mode.
Use the no form of this command
to reset a trunking characteristic
to the default.
Defines the native VLAN when
the interface is in trunk mode.
Use the no form of this command
to restore the default
configuration.
Sets the general characteristics
when the interface is in general
mode.
Use the no form of this command
to reset a general characteristic to
the default.
Configures the PVID when the
interface is in general mode.
Use the no form of this command
to restore the default
configuration.
Sets the port's VLAN when the
interface is in customer mode.
Use the no form of this command
to restore the default
configuration.
471