Dell PowerConnect 5524P User Manual page 387

– Remote Rx Timer (μsec) — Indicates the local link partner's
reflection of the remote link partner's Rx value.
Configuring Green Ethernet Using CLI Commands
The following table summarizes the CLI commands for configuring Green
Ethernet.
Table 10-3. Green Ethernet CLI Commands
CLI Command
green-ethernet short-reach
no green-ethernet short-reach
green-ethernet short-reach
force
no green-ethernet short-reach
force
green-ethernet short-reach
threshold cable-length
no green-ethernet short-reach
threshold
green-ethernet power-meter
reset
eee enable
no eee enable
eee lldp enable
no eee lldp enable
show eee
Description
Enables/disables Green Ethernet short
reach mode.
Forces short-reach mode on an
interface.
Use the no form of this command to
return to the default.
Set the maximum cable length for
applying short-reach mode.
Use the no form of this command to
return to the default.
Resets the power save meter.
Enables the EEE mode globally. Can
be used globally or per interface.
Use the no format of the command to
disable the mode.
Enables EEE support by LLDP on an
Ethernet port.
Use the no format of the command to
disable the support.
Displays EEE information.
Dell PowerConnect 55xx Systems User Guide
387