•
Selection of trap generation parameters
•
Access control checks
After creating a notification filter, attach it to a notification recipient in the
SNMPv1,2 Notification Recipients pages.
To add a notification filter:
1 Click System > SNMP > Notification Filters in the tree view to display
the Notification Filter: Summary page.
Figure 9-52. Notification Filter: Summary
2 The OIDs of the selected filter are displayed.
3 If required, the notification filter type can be changed by selecting one of
the following options:
–
Excluded — OID traps or informs will not be sent.
–
Included — OID traps or informs will be sent.
324
Dell PowerConnect 55xx Systems User Guide