Dell PowerConnect 5524P User Manual page 261

Table 9-41. Access Profiles CLI Commands (Continued)
CLI Command
show management access-list
[name]
show management access-class
The following is an example of the CLI commands:
console(config)# management access-list mlist
console(config-macl)# permit gi1/0/1
console(config-macl)# permit gi1/0/2
console(config-macl)# deny gi1/0/3
console(config-macl)# deny gi1/0/4
console(config-macl)# exit
console(config)# management access-class mlist
console(config)# exit
console# show management access-list
mlist
-----
permit gi1/0/1
permit gi1/0/2
deny gi1/0/3
deny gi1/0/4
! (Note: all other access implicitly denied)
console# show management access-class
Management access-class is enabled, using access list
mlist
Dell PowerConnect 55xx Systems User Guide
Description
Displays the active management
access-lists.
Displays information about
management access-class.
261