Dell PowerConnect 5524P User Manual page 240

Host Name Mapping
Host names can be dynamically mapped to IP addresses through the Domain
Name System pages, or statically through the Host Name Mapping page.
To assign IP addresses to static host names.
1 Click System > IP Addressing > Host Name Mapping in the tree view to
display the Host Name Mapping: Summary page.
Figure 9-26. Host Name Mapping: Summary
The currently-defined host names are displayed.
2 Click Add to add a new host name. Up to four IP addresses can be added.
3 For each IP address, enter the fields:
– Supported IP Format — Select whether the IPv4 or IPv6 format is
supported.
240
Dell PowerConnect 55xx Systems User Guide