Dell PowerConnect 5524P User Manual page 321

To define an SNMP community:
1 Click System > SNMP > Communities in the tree view to display the
Communities: Summary page.
Figure 9-51. SNMP Community
The Basic and Advanced tables are displayed.
2 To add a new community, click Add.
3 Define the SNMP management station by entering its IP address
information:
– Supported IP Format — Select whether the IPv4 or IPv6 format is
being used.
– IPv6 Address Type — When the community supports IPv6, this
specifies the type of static address supported. The possible options are:
• Link Local — A Link Local address that is non-routable and used
for communication on the same network only.
Dell PowerConnect 55xx Systems User Guide
321