Dell PowerConnect 5524P User Manual page 368

2 Enter the fields:
– Identify Unit ID —Select a unit. This unit's Location and Power LED
start blinking. Select All to cause the Location LEDs in all the units in
the stack to light up.
– Identification Duration (2-60) —Enter a time interval. The Location
and Power LED light up for this period of time.
Setting the Location LED Using the CLI
The following table summarizes the CLI commands for setting the Location
LED:
Table 9-72. Location LED CLI Commands
CLI Command
system light [unit unit-
number] [duration seconds]
system light stop
The following is an example of the CLI command:
console# system light unit 1
368
Dell PowerConnect 55xx Systems User Guide
Description
Lights the location LED on a spe-
cific unit.
Use the no form of this command to
turn off the light.