Selected from List — Select the device feature OID by using the
•
Up and Down buttons to scroll through a list of all device OIDs.
Or:
Insert — Specify the device feature OID.
•
View Type — Specify if the defined OID branch will be included or
–
excluded in the selected SNMP view.
Defining SNMP Views Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the View Settings pages.
Table 9-57. SNMP View CLI Commands
CLI Command
snmp-server view view-name
oid-tree {included|excluded}
no snmp-server view view-name
[oid-tree]
show snmp views [viewname]
The following is an example of CLI commands:
console(config)#
console(config)#
console#
Name
------------
user1
Default
Default
Default
Default
DefaultSuper
314
Dell PowerConnect 55xx Systems User Guide
snmp-server view
end
show snmp views
OID Tree
---------------
system
iso
snmpVacmMIB
usmUser
rndCommunityTable
iso
Description
Creates or updates a SNMP server view
entry.
Use the no form of this command to
remove an SNMP server view entry.
Displays the configuration of a view or all
views.
user1 1
Type
--------
included
included
excluded
excluded
excluded
included
included