Dell PowerConnect 5524P User Manual page 152

2 Enter/view the parameters:
– System Name (0-159 Characters) — Enter the user-defined device
name.
– System Contact (0-159 Characters) — Enter the name of the contact
person.
– System Location (0-159 Characters) — Enter the location where the
system is currently running.
– MAC Address — Displays the device MAC address.
– Sys Object ID — Displays the vendor's authoritative identification of
the network management subsystem contained in the entity.
– Date — Enter the current date (mandatory). This date can also be
entered in the Manual Time Settings page. If SNTP has been defined,
but the SNTP server is not available, the switch uses the date and time
in this field and the Time field.
– Time — Enter the current time (mandatory). This time can also be
entered in the Manual Time Settings page. If SNTP has been defined,
but the SNTP server is not available, the switch uses the date and time
in this field and the Date field.
– System Up Time — Displays the amount of time since the last device
reset.
3 For each unit in the stack (displayed in Unit No.), the following
information is displayed:
– Service Tag — Displays the service reference number used when
servicing the device.
– Asset Tag — Enter the device asset tag.
– Serial No. — Displays the device serial number.
4 Enter the Asset Tag (0-16 Characters) for each unit in the stack. This is
the user-defined reference for the unit.
152
Dell PowerConnect 55xx Systems User Guide