Advanced — QoS is enabled in Advanced mode on the switch.
–
–
Disable — QoS is not enabled on the switch.
Setting QoS Mode Using CLI Commands
The following table summarizes the CLI commands for setting the QoS
mode.
Table 22-1. QoS Mode CLI Commands
CLI Command
qos [basic|advanced]
no qos
show qos
The following is an example of the CLI commands:
console(config)# qos basic
644
Dell PowerConnect 55xx Systems User Guide
Description
Enables QoS on the device.
Use the no form of this command to disable QoS
on the device
Displays the QoS mode.