Dell PowerConnect 5524P User Manual page 96

Table 8-1. Port Security CLI Commands (Continued)
CLI Command
port security max {max-addr}
no port security max
port security mode {lock | max-
addresses }
no port security mode
port security [forward | discard |
discard-shutdown] [trap seconds]
no port security
port security
[forward|discard|discard-shutdown]
[trap seconds]
no port security
show ports security
[[gigabitethernet|tengigabitethern
et] port-number ]|port-channel
LAG-number]
96
Dell PowerConnect 55xx Systems User Guide
Description
Specifies the maximum number of
MAC addresses that can be learned
on the port.
Use the no form of this command
to restore the default
Configures the port security
learning mode.
Use the no form of this command
to restore the default
configuration.
Enables port security on an
interface.
Use the no form of this command
to disable port security on an
interface.
Configures port security on an
interface.
Use the no form of this command
to disable port security.
Displays lock status of specified
interface or of all interfaces.