Dell PowerConnect 5524P User Manual page 549

– Device ID — Neighboring device ID
– System Name — Name of the neighboring system
– Port ID — Neighboring port ID
– Capabilities — Neighboring device capabilities
2 Click Clear Neighbors Table to delete all the entries or select Remove to
delete a specific port entry.
3 Click the Details button of a port to display the Neighbors Information:
Details page for that port.
In addition to the fields displayed in the MED Port Settings: Details
Advertise Information page and the Green Ethernet Configuration pages,
the following fields are displayed for the neighbors of the selected port:
– Power Type — Port's power type
– Power Source — Port's power source
– Power Priority — Port's power priority
– Power Value — Port's power value, in Watts
– Hardware revision — Hardware revision
– Firmware revision — Firmware revision
Software revision — Software revision
–
– Serial number — Device serial number
– Manufacturer name — Device manufacturer name
– Model name — Device model name
– Asset ID — Asset ID
Configuring LLDP Neighbors Using CLI Commands
The following commands are used to configure LLDP neighbors.
Table 17-5. LLDP Neighbors Information CLI Commands
CLI Command
show lldp neighbors
[gigabitethernet|tengigabite
thernet] port-number
Description
Displays information about neighboring
devices discovered using LLDP
Dell PowerConnect 55xx Systems User Guide
549