Table 10-10. Storm Control CLI Commands (Continued)
CLI Command
show ports storm-control port
The following is an example of the CLI commands:
console(config)# interface gi1/0/1
console(config-if)# storm-control broadcast enable
console(config-if)# storm-control include-multicast
unknown-unicast
console# show ports storm-control gi1/0/1
Port
State
-------- --------
gi1/0/1
Disabled
410
Dell PowerConnect 55xx Systems User Guide
Description
Displays the storm control
configuration.
Rate [Kbits/Sec]
----------------
8500
Included
---------------------
Broadcast