To configure bandwidth limitation:
1 Click Quality of Service > General > Bandwidth in the tree view to
display the Bandwidth: Summary page.
Figure 22-6. Bandwidth: Summary
The ingress and egress rates are displayed for all ports on the selected unit.
2 To set interface parameters, click Edit.
3 Select an interface, and enter the fields:
Enable Ingress Rate Limit — Enable/disable ingress traffic limit for
–
the interface. If this field is selected, enter the Ingress Rate Limit.
–
Ingress Rate Limit — Enter the ingress traffic limit for the interface.
Dell PowerConnect 55xx Systems User Guide
655