Creating a Dynamic ARP Inspection List Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the Dynamic ARP Inspection List pages .
Table 18-2. Dynamic ARP Inspection List CLI Commands
CLI Command
ip arp inspection list
create name
no ip arp inspection list
create name
The following is an example of some of the CLI commands:
console(config)# ip arp inspection list create servers
console(config-ARP-list)#
556
Dell PowerConnect 55xx Systems User Guide
Description
Creates a static ARP binding list and
enters the ARP list configuration mode.
Use the no form of this command to
delete the list.