Dell PowerConnect 5524P User Manual page 699

• Full Duplex Mode — Permits for bisynchronous communication, for
example, a telephone. Two parties can transmit information at the same
time.
Half Duplex Mode — Permits asynchronous communication, for
•
example, a walkie-talkie. Only one party can transmit information at a
time.
Dynamic VLAN Assignment (DVA)
• Allows automatic assignment of users to VLANs during the RADIUS
server authentication. When a user is authenticated by the RADIUS
server, the user is automatically joined to the VLAN configured on the
RADIUS server.
E
Egress Ports
Ports from which network traffic is transmitted.
End System
An end user device on a network.
Ethernet
Ethernet is standardized as per IEEE 802.3. Ethernet is the most common
implemented LAN standard. Supports data transfer rates of Mpbs, where 10,
100 or 1000 Mbps is supported.
EWS
Embedded Web Server
browser. Embedded Web Servers are used in addition to or in place of a CLI
or NMS.
F
FFT
Fast Forward Table.
arrives to a device with a known route, the packet is forwarded via a route
listed in the FFT. If there is not a known route, the CPU forwards the packet
and updates the FFT.
FIFO
. Provides device management via a standard web
Provides information about forwarding routes. If a packet
Dell PowerConnect 55xx Systems User Guide
699