Table of Contents
Advertisement
Clearing Panel Modes
Destination and Source Selection Methods
Selecting a Destination to be Controlled
Direct Selection Method
JUPITER L-S and LCD Series Control Panel Instruction Manual101
L32 and L64 panels can be placed into various modes for item and menu
selection. Buttons on the panel behave differently, depending on what
panel mode is currently active.
If a
or
button is lit, pressing it will clear that panel operating
Level
Preset
mode.
Pressing the
button exits the panel from some menu display and selec-
Clear
tion states.
In the completely cleared home state, Sources can be switched to Destina-
tions using the panel buttons.
On L32 and L64 panels Destinations and Sources can be selected directly,
by pressing buttons on the panel, or by scrolling through menus.
: This is the fastest method for selecting a Source or Destina-
Direct Selection
tion, but is limited to the number of buttons configured on the panel.
: This method requires more steps, but allows selection of
Menu Selection
Sources or Destinations not currently assigned to buttons on the panel.
Note
If a Source or Destination cannot be selected, the panel may be restricted by
the CP Input or CP Output set used on the MPK Devices table. See
Section 4-Jupiter System Configuration.
The Destination window displays the name of the Destination currently
being controlled in yellow.
Buttons configured for Destinations that are not currently being controlled
by the panel are illuminated in low yellow.
1. Clear the panel (
Level
2. Press the preferred yellow Destination button. If the selection is valid,
the button will illuminate in high yellow. The name of the Destination
will appear in the Destination window, and the name of the Source
currently switched to that Destination will appear in the Status
window.
You will now be able to select a different Source for that Destination.
,
, and
buttons OFF).
Menu
Preset
L32/L64 Control Panels
Advertisement
Table of Contents
