Table of Contents
Advertisement
Section 11 — LCD Series Panel Operation
Line #1:
P:LCD16
Locking
174
Protecting a Destination
To protect a Destination:
1. Select the Destination that you wish to Protect by pressing the button.
Note
In the Multiple Destination mode, Destinations are locked or protected on a
per page basis.
2. Press the
Protect/Lock
button will then turn magenta.
3. Press the
button in the Command buttons section. The Destination
Take
button will then change color to magenta. The
also blink magenta.
Note
If the Sticky Destination feature has been turned on for the panel, the button
will be white. Press the selected button again to change the color.
The letter "P" will appear in front of the name of the panel that pro-
tected the Destination. See
Figure 93. Protected Destination Displayed
P:LCD16
PINP-004
OUT-255
Locking a Destination prevents that Destination from being switched by
any panel in the system, including the initiating panel. If any of a Destina-
tion's level is locked, the
red.
Locking a Destination
To lock a Destination:
1. Select the Destination you wish to lock by pressing the button.
JUPITER L-S and LCD Series Control Panel Instruction Manual
button in the Command buttons section once, the
Figure 93
for an example.
button on that panel will illuminate
Lock/Protect
button will
Protect-Lock
Advertisement
Table of Contents
