Table of Contents
Advertisement
SXY Control Panel
Level Buttons (10)
Selecting a Destination to be Controlled
Selector Knob Method
Category Button Method
JUPITER L-S and LCD Series Control Panel Instruction Manual135
For a summary of SXY functions see
Figure 78. SXY Control Panel
Level
Clear
1. Press
to take the panel to its home state.
Clear
2. Press
. The Preset window will display
Select
default mode.
3. Press
. The Preset window will display
Select
last Destination chosen (which may not be the currently controlled
Destination).
4. Use the selector knob to scroll through the available Destinations.
5. When the desired Destination is displayed, press
window will report the name of the Destination now being controlled
in yellow, and its current Source is shown in the Status window.
The panel is now ready for Source selection.
Note
If the Destination cannot be selected, it may be because the panel has been
limited to a certain Destination by the CP Output set used on the MPK Devices
table. See Section 4-Jupiter System Configuration.
If your Jupiter system and panel has been configured with categories, you
will be able to use the 16 Category buttons on the right to select Destina-
tions.
1. Follow
Step 1
through
2. Press the Category button to select the desired category (VTR, for
example). The Category buttons then shift to number selection mode.
page
36.
Category Buttons (16)
Step 3
above.
SXY Control Panel
Protect/
Lock
as the
Select Destination?
along with the
Destination
. The Destination
Select
Advertisement
Table of Contents
