Table of Contents
Advertisement
Section 6 — L-S Series Panel Operation
S25/S50 Control Panels
1 Destination / 8 Levels
128
For a summary of S25/S50 functions see
Figure 71. S25 Control Panel
Figure 72. S50 Control Panel
The S25 and S50 are Button-per-Source Control panels configurable for
various combinations of Destinations and levels. The buttons on the left
select Sources. The eight buttons on the right select levels or Destinations.
If desired, breakaways can be disabled on the CP Level Set table by setting
the Break Flag for each level to `N.'
The S50 is configured and operated same as the S25, except that buttons are
provided for 50 Sources.
If the S25/S50 is configured to control a single Destination, the eight-button
cluster on the right can be used for breakaway switching of the first eight
levels of the router. An example is shown in
Figure 73. S25 Configured for 1 Destination / 8 Levels
Sources
This configuration is indicated when all eight buttons are illuminated in
low or high amber.
Note
Low amber color may be difficult to detect in normal room lighting.
JUPITER L-S and LCD Series Control Panel Instruction Manual
page
35.
Figure
73.
8 Levels
S50
Advertisement
Table of Contents
