Table of Contents
Advertisement
Section 6 — L-S Series Panel Operation
Un-protecting or Unlocking a Destination
Sequence (Salvo) Switching
Override Mode
140
The panel that originally imposed a protect or lock on a Destination can
clear those states for that Destination.
1. Confirm the desired Destination appears in the Destination window. If
not, see Selecting a Destination to be Controlled
Protect button will blink when the Destination has been protected or
locked by that panel.
2. Press the
Protect/Lock
(locked Destination). That button will stop blinking and the
will illuminate.
3. Press
. The Destination's protect or lock state will be cleared.
Take
After a sequence is created and downloaded (see Setting Up a Salvo with a
Sequence Set
on page
62) it can be executed as follows:
1. Press
. The display windows will display various modes.
Select
2. Rotate the selector knob to choose
3. Use the knob to scroll through the sequences displayed in the Preset the
window.
4. When the desired sequence is selected, press
in the sequence will be switched to their designated Sources.
The panel remains in Sequence select mode, allowing you to scroll to
and select other sequences to execute.
5. To exit Sequence select mode, press the
Override function is used for a quick or emergency switch to an often-used
Source. For example, a Black signal could be defined as the first "override"
Source for a particular control panel, corresponding to the first override
soft button position. Override names can be customized if desired. Each
override can be configured to switch any desired combination of router
levels.
If no overrides are defined for the panel, a
will be displayed when you try to access the mode.
1. Confirm the desired Destination appears in the Destination window
(see Selecting a Destination to be Controlled
2. Press
. The display windows will display various modes.
Select
JUPITER L-S and LCD Series Control Panel Instruction Manual
button once (protected Destination) or twice
Sequence?
Clear
No Overrides Configured
on page
on page
135. The Lock/
button
Take
and press
.
Select
. All the Destinations
Take
button.
message
135.)
Advertisement
Table of Contents
