Multiple Destination Mode - GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual

Multiple Destination Mode

JUPITER L-S and LCD Series Control Panel Instruction Manual167
levels that are associated with the selected Destination. You must be in the
main menu to see the
Single Destination Mode
you will remain on the same page. The page number can be found in the
top left corner of the Single Destination Mode menu.
Note The ability to perform a breakaway, lock, or protect is not allowed in this
mode.
To perform a Take:
1. Press the Scroll wheel to go to the Main menu.
2. Press the
Single Destination Mode?
3. Scroll through the available Sources using the Scroll wheel.
4. Select the preferred Source. The panel will then display the Destination
in line #3. The Source button that was selected will turn yellow and will
show the status of the Destination. The Take request is immediately
sent to the host.
The Multiple Destination mode is designed to provide access to many Des-
tinations and connect them to a single Source. You must be in the main
menu to see the
Multiple Destination Mode
To perform a Take:
1. Press the Scroll wheel to go to the Main menu.
2. Select the
Multiple Destination Mode?
3. Scroll through the available Destinations using the Scroll wheel.
4. Select the preferred Destination buttons by pressing them. More than
one Destination may be selected. The selected Destination buttons will
be white instead of yellow.
5. Press The
Select Source?
6. Scroll through the available Sources using the Scroll wheel.
7. Select the preferred Source entry's button by pressing it. The panel will
then automatically return to the last page with a selected destination on
it.
8. The selected buttons will show the Source on the first line and the
Destination on the third line
button. After making the switch
button.
button.
button.
button.
(Figure 86).
Basic Panel Operations