GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual page 152

Section 7 — LCD Introduction
152
: This button is in the #16 location. This button is for infor-
Information button
mation only.
PAGE #2
: This button is in the #1 location. The
Net-1 MAC button
plays the physical MAC-1 address that is assigned to the panel. The infor-
mation must match the sticker that is attached to the back of the LCD panel.
: This button is in the #2 location. The
Net-1 button
current IP address that is assigned to the Control panel's LAN port that is
on the back of the panel. This assignment is made through NetConfig or
through the Web page.
: This button is in the #3 location. The
Net-1 SN button
the physical Subnet mask that is assigned to the Control panel's port. This
assignment is made using the NetConfig application or through the Web
page.
: This button is in the #4 location. The
Net-1 GW button
the physical Gateway address that is assigned to the Control panel's LAN
port that is on the back of the panel. This assignment is made through Net-
Config or through the Web page.
: This button is in the #5 location. The
Net-2 MAC button
plays the physical MAC-2 address that is assigned to the panel and must
match the sticker that is on the back of the panel.
Net-2 button : This button is in the #6 location. The
current IP address that is assigned to the Control panel's LAN port that is
on the back of the panel. This assignment is made through the Web page.
Net-2 SN button : This button is in the #7 location. The
the physical Subnet mask that is assigned to the Control panel's LAN port
that is on the back of the panel. This assignment is made through the Web
page.
: This button is in the #8 location. The
Net-2 GW button
the physical Gateway address that is assigned to the Control panel's LAN
port that is on the back of the panel. This assignment is made through the
Web page.
Information button : This button is in the #16 location and is for information
only.
PAGE #3
: This button is in the #1 location. Information about the
FPGA Image button
FPGA SOF image, which is stored in the user section of the Flash memory,
is displayed.
: This button is in the #2 location. The version of the User
Application button
Application code that is currently being used is displayed.
JUPITER L-S and LCD Series Control Panel Instruction Manual
button dis-
Net-1 MAC
button displays the
Net-1
button displays
Net-1 SN
button displays
Net-1 GW
button dis-
Net-2 MAC
Net-2 button displays the
Net-2 SN button displays
button displays
Net-2 GW